Device Configuration
GPS Tracker Configuration
Configure your GPS tracker: APN settings, server IP & port, SMS commands, upload interval, ACC, geofence, SOS and fuel sensor configuration.
APN Configuration
Set the correct GPRS APN for your SIM card so the GPS tracker can reach the mobile network. Wrong APN is the #1 cause of offline devices.
Server IP & Port Configuration
Point the tracker at your GPS tracking platform IP and port over TCP or UDP so data is delivered to your server.
SMS Command Configuration
Send SMS commands to read or change tracker parameters without a config tool. Ideal for field technicians.
Upload Interval Configuration
Balance data cost and freshness by setting the GPS data upload interval for moving and stationary states.
ACC Configuration
Use the ACC (ignition) input to detect engine on/off and switch between driving and parking modes.
Geofence Configuration
Create circular or polygon geofences and trigger alerts when the vehicle enters or leaves a zone.
SOS Configuration
Bind an SOS button or input to send an emergency alert with location to preset contacts.
Fuel Sensor Configuration
Connect an analog or RS232 fuel sensor to monitor fuel level and detect theft via the config tool.
Quick SMS examples
- setparam 1000:<APN> — APN
- setparam 2000:<IP>:<PORT> — Server IP & port
- setparam 2001:<INTERVAL> — Upload interval (sec)