EYE Sensor Mesh
EYE Sensor Mesh Asset Tracker
Overview
EYE Sensor Mesh is a battery-powered indoor/outdoor asset tracker based on Wirepas Mesh. No wiring, long battery life.
Installation Guide
Wiring and mounting information for EYE Sensor Mesh. Check the installation guide and the device-specific wiring before connecting power.
| Wire | Connection |
|---|---|
| Red | Battery Positive (+) |
| Black | Ground (-) |
| Orange | ACC (Ignition) |
| Yellow | Relay / Immobilizer |
| Green | Digital Input 1 |
| Blue | Analog Input |
| note | Battery powered — no wiring. Mount with the supplied adhesive or screws. |
Configuration
Configure APN, server IP and port, upload interval, ACC, geofence, SOS and supported sensor parameters on the device configuration page. Device Configuration.
SMS Commands
This model is configured through the configuration tool or platform and does not use SMS commands.
Protocol
Communication protocol and API integration information is available on the Protocol & API page. Protocol & API.
Firmware & Tools
Firmware and tools for EYE Sensor Mesh are available on the Firmware & Tools page. Firmware & Tools
FAQ
How long does the battery last?
Depending on report interval, typically 1–5 years. Use the config tool to tune the interval.