FMB140
FMB140 Advanced Vehicle GPS Tracker
Overview
FMB140 is a flexible vehicle tracker with driver authentication, behaviour tracking and 1-Wire support for iButton and temperature sensors.
Installation Guide
Wiring and mounting information for FMB140. Check the installation guide and the device-specific wiring before connecting power.
| Wire | Connection |
|---|---|
| Red | Battery Positive (+) |
| Black | Ground (-) |
| Orange | ACC (Ignition) |
| Yellow | Relay / Immobilizer Output |
| Green | Digital Input 1 |
| Blue | 1-Wire (iButton) |
Configuration
Configure APN, server IP and port, upload interval, ACC, geofence, SOS and supported sensor parameters on the device configuration page. Device Configuration.
SMS Commands
getinfoReturn device configuration snapshot.setparam 1000:<APN>Set GPRS APN.
Protocol
Communication protocol and API integration information is available on the Protocol & API page. Protocol & API.
Firmware & Tools
Firmware and tools for FMB140 are available on the Firmware & Tools page. Firmware & Tools
FAQ
How do I enable driver authentication?
Connect an iButton reader to the 1-Wire line and enable the iButton rule in the config tool.