FTC200
FTC200 OBD GPS Tracker
Overview
FTC200 plugs into the OBD-II port — no wiring required. It reads CAN bus data and connects external equipment for professional telematics.
Installation Guide
Wiring and mounting information for FTC200. Check the installation guide and the device-specific wiring before connecting power.
| Wire | Connection |
|---|---|
| Red | Battery Positive (+) |
| Black | Ground (-) |
| Orange | ACC (Ignition) |
| Yellow | Relay / Immobilizer |
| Green | Digital Input 1 |
| Blue | Analog Input |
| note | OBD-II plug-in — no wiring. Just insert into the vehicle diagnostic port. |
Configuration
Configure APN, server IP and port, upload interval, ACC, geofence, SOS and supported sensor parameters on the device configuration page. Device Configuration.
SMS Commands
getinfoReturn device configuration snapshot.
Protocol
Communication protocol and API integration information is available on the Protocol & API page. Protocol & API.
Firmware & Tools
Firmware and tools for FTC200 are available on the Firmware & Tools page. Firmware & Tools
FAQ
No power after plugging in?
Confirm the OBD-II port is live (some vehicles only power it with ignition on) and the tracker LED blinks.